background image

-3-

 

4.  The QuadraFlare LED Scene Light assembly has two 12" long lead wires that 

exit out the back of the unit, for making electrical connections. 

 

5.  Complete the electrical connections as described in paragraph E. Electrical 

Connections. 

 

6.  See 

Figure 1.

 Align the mounting gasket and QuadraFlare LED Scene Light 

as sembly with the previously inserted screw grommets and secure with the provided #8 

x 1-1/2 S.S. screws. Be sure to have the lens mounted to the assembly with the top side 

of the lens at the top of the unit. The lens has “TOP” molded into the top of the lens.

E.  ELECTRICAL CONNECTIONS / OPERATION

 

The Model QL97LEDSCENE QuadraFlare LED Scene Light assembly is designed 

to operate on 12 Vdc. Two 12" long lead wires are supplied for making electrical connec-

tions to the light assembly. Ensure that all wires are properly connected and insulated 

ap propriately. 

 

1.  Using 18 AWG (minimum) wire, connect the red (+) lead to the positive power 

source terminal and the black (–) lead to the negative power source terminal. 

 

2.  Energize the supply circuit and test the QuadraFlare LED Scene Light as-

sembly for proper operation.

 

SAFETY MESSAGE TO OPERATORS 

Peoples’ lives depend on your safe use of our products. Listed below 

are some important safety instructions and precautions you should 

follow:

• 

Although your warning system is operating properly, it may not 

be completely effective. People may not see or heed your warn­

ing signal. You must recognize this fact and continue driving 

cautiously.

• 

Also, situations may occur which obstruct your warning signal 

when natural or man­made objects are between your vehicle and 

others, such as: raising your hood or trunk lid. If these situations 

occur, be especially careful.

• 

This product contains high intensity LED devices. To prevent eye 

damage, DO NOT stare into the light beam at close range.

• 

At the start of your shift, you should ensure that the light is 

securely attached and operating properly. 

 

Failure to follow these safety precautions may result in property damage, 

serious injury, or death to you, to passengers, or to others.

RETAIN AND REFER TO THIS MESSAGE

Содержание QUADRAFLARE QL97LEDSCENE

















Отзывы: