Informer Series Tone Alert Receiver
13
Installation Instructions
the Informer TAR. Route the cord to ensure it is protected against walking on,
tripping over or pinching the cord. Turn the battery switch to the on position. Refer to
the “Using the Battery Switch.”
Input/Output Connections
Do not exceed the electrical ratings defined in the specifications for the
Input/Output connections.
The Informer has a 600-ohm balanced audio output and two SPDT relay outputs. A
removable eight (8) position connector is located on the back side of the Informer for
making electrical connections. The connector accepts 5 mm (3/16”) stripped wire,
18–26 AWG.
Make electrical connections to the Input/Output connector as follows:
Table 9 Input/Output Connections
Description
Audio Output
Audio Output
Relay 1 N.O. Contact
Relay 1 Common
Relay 1 N.C. Contact
Relay 2 N.O. Contact
Relay 2 Common
Relay 2 N.C. Contact
Figure 2 Back of Informer
