9
Specifications
Description, Specifications, Installation, and Operation Manual
The following figure illustrates the wall mounted push buttons for activation.
Figure 2 PS Series Push Button Stations (optional)
Specifications
Table 3 Specifications
Operating Voltages at J2
using AC Transformer
9-15 Vdc
108-128 Vac, 60 Hz with wall transformer
Operating Current
Standby: 9 V = < 200 mA, 12 V = < 150 mA
With siren or message audio:
9 V= < 450 mA, 12 V= < 350 mA
Operating with PoE,
IEEE 802.3af, 48V input
PoE: 42 to 57 VDC, IEEE 802.3af
units shipped prior to February 2014: mode B units
shipped after February 2014: mode A
Standby: < 60 mA
With siren or message audio: <110 mA
Audio Data Playback Storage
17 hours and 4,000 messages with 2 G microSD card
Audio Frequency response
300-3000 Hz, +1 to -3 dB per octave
Audio Output
0.5 W into 8 ohms
Audio Distortion
< 5% at 80 dB output, with 700 Hz tone
Warning Siren Audio
Seven user-configurable tones
Internal Failure Alarm
Unit will sound a short, low-level beep once every
30 seconds if network connectivity is lost.
Serial Port
RS232C, N, 8, 1 Baud rate configurable
Ethernet Port
IEEE 802.3, 10 BASE-T connection
Operating temp range
-22℉ to +140℉ (-30℃ to + 60℃)
Humidity range
0-95%, non-condensing
Size (H x W x L)
8.3 x 7.0 x 3.3 inches (210.82 x 177.8 x 83.82 mm)
Weight
3.2 lb (1.5 kg)
