19
Replacement Parts
Description, Specifications, Installation, and Operation Manual
port auto-negotiates at 10/100 Mbps, full or half duplex connection.
Power Connector
The Informer-IP has an integral 120/240 Vac transformer. The transformer provides
power to J2.
Table 10 J2 Input Power (from transformer)
J2
Power connector
Center – (9 to 15 Vdc)
Outside – GND
Disable Microphone (Internal option)
Internal on the PCB is JP3, which normally has a shorting plug to enable the built-in
microphone functionality. Model I-IPW Series B of the Informer series uses the speaker
as the microphone.
Table 11 JP3 (on the main PCB) Microphone Enable Jumper
JP3 Short to enable microphone functionality, remove to disable.
Replacement Parts
The Informer-IP uses one of these two types of connectors: one with slots or one without
slots. Match the 8-pin connector of your Informer-IP to the picture below and order the
corresponding part number.
Table 12 Replacement Part Numbers
Picture
Part Number
13900406A-08
140372A-08
