Installing the Top Channel with IMPAXX or MicroPulse Lights to the PBX Push Bar
3
Two- or Four-Light Top Channel
Installing the Top Channel
To install the top channel on the push bar:
1a.
Install the IPX lights (not included) to the brackets using 8-32 screws supplied with the IPX. Attach
assemblies to pushbumper as shown in Figure 1a using the supplied M4 hardware.
Figure 1a IMPAXX light secured to pushbumper (passenger-side)
1b
. See Figure 1b. Install the MicroPulse lights (not included) to the brackets using the supplied M3 hardware.
Install the supplied M4 clip nuts to the brackets. Attach assemblies to pushbumper using the supplied M4
hardware.
Figure 1b Assemblies attached to pushbumper
2
3
4
8
5
6
7
9
10
10
MPS600/600U
PUSHBUMPER
