Installing the Top Channel with IMPAXX or MicroPulse Lights to the PBX Push Bar
5
Two- or Four-Light Top Channel
Maintaining the Push Bar Assembly
Regularly clean stainless steel and gloss black finishes with a mild soap and water. Apply a non-abrasive wax
or polish. To polish small scratches on stainless steel, use stainless steel polish. To avoid making scratches on
the stainless steel surfaces, follow the grain of the steel while polishing. Take care not to apply the polish to
the lightheads.
Getting Technical Support
For technical support, please contact:
Federal Signal Corporation
Service Department
Phone: 1-800-433-9132
Fax: 1-800-343-9706
Email: [email protected]
Getting Repair Service
The Federal Signal factory provides technical assistance with any problems that cannot be handled locally.
Any units returned to Federal Signal for service, inspection, or repair must be accompanied by a Return
Material Authorization (RMA). Obtain a RMA from a local Distributor or Manufacturer’s Representative.
Provide a brief explanation of the service requested, or the nature of the malfunction.
Address all communications and shipments to the following:
Federal Signal Corporation
Service Department
2645 Federal Signal Dr.
University Park, IL 60484-3167
Ordering Replacement Parts
To order replacement parts, call Customer Support at 1-800-264-3578, 7
am
to 5
pm
, Monday through Friday
(CT) or contact your nearest distributor.
