10
Specifications
Informer15 Speaker (Model I-IP15)
Ordering Information
Table 1 Ordering Information
Part Number Description
I-IP15-C
15 W PoE Speaker with clear high-output LED
I-IP15-R
15 W PoE Speaker with red high-output LED
I-IP15-A
15 W PoE Speaker with amber high-output LED
I-IP15-B
15 W PoE Speaker with blue high-output LED
I-IP15-G
15 W PoE Speaker with green high-output LED
Specifications
Table 2 Electrical Requirements
Input Voltage
Power over Ethernet (PoE+ 802.3at) or 24 Vac (20-28 Vdc)
nominal
Input Current Draw
PoE+ 25.5 W or 24 Vdc at 1 A
Serial Port Protocol
FLASH programming and configuration
Default: 9600 bit/s, 8 data, 1 stop, no parity.
Configurable up to 115,200 bit/s
Open Collector Output
Maximum 30 V or 100 mA maximum,
(speaker pr24 Vdc, 20 mA maximum for external
relay)
Ethernet Port
IEEE 802.3, 10/100 Base-T connection with PoE+ 802.3at,
Type 2, 25.5 W
Alarm Initiating Inputs
Four optically Isolated Inputs
Audio Storage
Warning siren audio, seven factory installed tones: Wail,
Steady, Alternate Wail, Alternate Steady, Pulsed Wail, Pulsed
Steady, Auxiliary Chime
Prerecorded files
—
up to 4000 messages with up to
17 hours of recording time
Audio Data
8 bit 8 kHz mono WAV
Audio Frequency response 300 Hz to 3000 Hz, +1 to -3 dB per octave
Maximum Audio Output
15 W, 112 dB for tones and 107 dB for pink noise at 10 feet
Power Output
15 W into 8 ohm load
Frequency response
+/- 3 dB from 300-6.0 kHz
THD
< 5% at output
Hum and Noise
< -45 dB
Input Levels
1.77 Vrms (5 Vpp), 10 Vrms (28.3 Vpp) and 25 Vrms
(70.7 Vpp)
Table 3 Environmental
Operating temperature range -30°C to +65°C/-22°F to +149°F
Humidity range
0-95%, non-condensing
