2
Limited Warranty
This product is covered by a limited warranty, a copy can be found at
www.fedsig.com/SSG-Warranty.
Safety Messages to Installers and Users
This product should be installed to code in the country of use by qualified
personnel following all safety instructions below. Failure to do so may result in
property damage, serious injury, or death.
• Read and understand all instructions before installing, operating, or servicing
this equipment.
• Sound output will be severely reduced if any object are in front of the horn.
Keep front of horn free of obstruction.
• Do not connect this horn to the system or perform maintenance when power is
on.
• Do not paint the horn. No finish or coating is required. Paint may obstruct the
sound output, reducing the effectiveness of the horn.
• All effective warning horns produce loud sounds, which in certain
circumstances, may cause permanent hearing loss. Take appropriate
precautions such as wearing hearing protection. Recommendations in OSHA-
Sound Level Standard (29 CFR 1910) should not be exceeded.
• Establish a procedure to routinely check the signal system for proper activation
and operation.
• Never alter the unit in any manner.
• After installation and completion of initial system test, provide a copy of these
instructions to all personnel responsible for operation, periodic testing, and
maintenance of the equipment.
Unpacking the eHorn-HV
After unpacking the eHorn-HV, examine it for damage that may have occurred in
transit. If the horn has been damaged, do not attempt to install or operate it. File a
claim immediately with the carrier, stating the extent of the damage.
Carefully check all envelopes, shipping labels, and tags before removing or
discarding them. Disposal of all shipping materials must be carried out in
accordance with national and local codes and standards. If any parts are missing,
please contact Federal Signal Customer Support at 708-534-4756 or 800-344-
4634 or [email protected].
An Overview of the Model eHorn-HV
The Federal Signal eHorn-HV is a high output, continuous duty, marine and indoor/
outdoor-rated electronic horn with volume adjustment. The eHorn-HV is perfect for
use in high-ambient noise environments. The horn’s non-metallic, polycarbonate
housing is corrosion resistant and weatherproof for improved durability in harsh
industrial environments.
