background image

 

iv 

Limited Warranty

 

 

The  Federal  Warning  Systems  Division  of 

Federal  Signal  Corporation 

warrants  each 

new product to be free from defects in material and workmanship, under normal use and 
service, for a period of two years on parts replacement and factory-performed labor (one 
year  for  Informer,  EAS,  and  Federal  software  products)  from  the  date  of  delivery  to  the 
first  user-purchaser.    Federal  Warning  Systems  warrants  every  2001  &  Eclipse  Siren 
(Top  of  pole  only)  to  be  free  from  defects  in  material,  per  our  standard  warranty,  under 
normal use and service for a period of five years on parts replacement. 
 
During this warranty period, the obligation of  Federal is limited to repairing or  replacing, 
as  Federal  may  elect,  any  part  or  parts  of  such  product  which  after  examination  by 
Federal discloses to be defective in material and/or workmanship. 
 
Federal will provide warranty for  any unit which is delivered, transported prepaid,  to the 
Federal  factory  or  designated  authorized  warranty  service  center  for  examination  and 
such examination reveals a defect in material and/or workmanship. 
 
This  warranty  does  not  cover  travel  expenses,  the  cost  of  specialized  equipment  for 
gaining  access  to  the  product,  or  labor  changes  for  removal  and  re-installation  of  the 
product.  The  Federal  Signal  Corporation  warranty  shall  not  apply  to  components  or 
accessories that have a separate warranty by the original manufacturer, such as, but not 
limited to, batteries. 
 
Federal will provide on-site warranty service during the first 60-days after the completion 
of  the  installation,  when  Federal  has  provided  a  turn-key  installation  including 
optimization and/or commissioning services. 
 
This  warranty  does  not extend  to  any  unit which  has  been  subjected  to abuse,  misuse, 
improper installation or which has been inadequately maintained, nor to units which have 
problems  related  to  service  or  modification  at  any  facility  other  than  Federal  factory  or 
authorized  warranty  service  centers.    Moreover,  Federal  shall  have  no  liability  with 
respect  to  defects  arising  in  Products  through  any  cause  other  than  ordinary  use  (such 
as, for example, accident, fire, lightning, water damage, or other remaining acts of god). 

 
THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT 
NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS 
FOR  A  PARTICULAR  PURPOSE.    IN  NO  EVENT  SHALL  FEDERAL  BE  LIABLE  FOR 
ANY  LOSS  OF  PROFITS  OR  ANY  INDIRECT  OR  CONSEQUENTIAL  DAMAGES 
ARISING OUT OF ANY SUCH DEFECT IN MATERIAL WORKMANSHIP

 

 
 

 

 

 

 

 

2645 Federal Signal Drive, University Park, IL 60466 

Phone: (800) 524-3021 Fax: (708) 534-4865 

Website: 

http://www.federalwarningsystems.com

 

 

Содержание 2001-130























Отзывы: