![background image](http://html.mh-extra.com/html/federal-signal-corporation/2001-130/2001-130_installation-and-operating-instructions-manual_548444015.webp)
8
3-4.
PRE-OPERATION CHECKOUT.
After the siren has been completely
installed, perform the following checks before
putting the siren into service.
WARNING
The output sound level of a siren is
capable of causing severe hearing
discomfort or permanent hearing
damage. Therefore, ALWAYS wear
hearing protection when performing
tests or maintenance on the siren.
A. Make sure that all air intakes and
sound outlets are not obstructed.
B. Make sure all connections in the
Control Unit/Battery Box are correct and
properly tightened.
C. Activate all siren tones to verify they
are operating properly. The siren should
remain rotating during all alert tones.
D. After the installation is complete and
it has been established that the siren is
operating properly, Federal recommends that
all
control
devices
be
padlocked
to
discourage tampering and vandalism.
Содержание 2001-130
Страница 20: ...13 Figure 4 9 2001 130 Final Assembly Sheet 1 ...
Страница 21: ...14 Figure 4 10 2001 130 Final Assembly Sheet 2 ...
Страница 22: ......