background image

1

Dear Owner:

Congratulations on your choice of a Herrmidifier brand humidification system. Your family can
now look forward to breathing more comfortable air, winter after winter. We are committed to
providing advanced products that improve the quality of the air you breathe.

The following information will familiarize you with the operation of your new humidifier and
provide helpful tips on how to obtain maximum performance from your unit.

Introduction

The benefits of a properly humidified environment (35-50% Relative Humidity) are many. They
include both personal comfort as well as the preservation of furniture, draperies, carpets,
wooden floors and cabinets, paintings, pianos, etc.. Your home will be more comfortable at a
lower temperature (i.e.: 68° F) at 30-40% Relative Humidity (RH) than at 71° to 72° F without
controlled humidity. Since every degree of temperature setback represents about 3% of your
heating costs, this can possibly represent a significant annual savings.

During the heating season, cold air is brought into the home and heated. When heated, this air
dries out and greatly increases its capacity to hold more moisture. By using a humidifier, a source
of water is provided to satisfy this increased moisture holding capability, rather than having it
drawn from our body surface and the surrounding furnishings in the home.

A properly maintained and efficiently operating humidifier is a source of improved Indoor Air
Quality and personal comfort. We hope you will enjoy the benefits of your humidifier. 

Type of Unit

Centrifugal atomizing

Duct Mounting

Return

GPD @ 140 ° F

6.0 maximum

GPD @ 120 ° F

6.0 maximum

GPD @ 100 ° F

6.0 maximum

Voltages

120V/ 240V

Unit Dimensions

10 1/2” DIA  x 12 1/2” H

Standard Equipment

Wall / duct mount humidistat (707U only)

Self piercing saddle valve

Features

Centrifugal atomizer

Operates on low current, less than a 100w bulb

All brass valve assembly

Universal mounting options

2 year warranty

Installation Options

Duct Side Mount

Mounts on face of vertical or side of horizontal return duct

Includes independent mounting bracket

Free Standing Wall 
Mount (707U only)

Mounts behind wall 

Includes independent mounting bracket

Includes discharge extension to extend through wall

Introduction

Specifications

Содержание Herrmidifier 707U

















Отзывы: