FEC FEC-150, Руководство пользователя

Страница: 32 / 44

Rev. 1.00
- 32 -
FEC-150
ESC V n
[Name] To set/clear 90° clockwise rotated character sets
[Type] ASCII ESC V n
HEX 1B 56 n
DECIMAL 27 86 n
[Range] 0 ≤ n ≤ 1, 48 ≤ n ≤ 49
[Description] To set/clear 90° clockwise rotated character sets depending on the value of
n .
n Function
0,48 To clear the 90° clockwise rotated character
1,49 To set the 90° clockwise rotated character
ESC
＼
n L n H
[Name] To set the relative printer position
[Type] ASCII
ESC
＼
nL nH
HEX 1B 5C nL nH
DECIMAL 27 92 nL nH
[Range] 0 ≤ nL ≤ 255
0 ≤ nL ≤ 255
[Description] The beginning point is based on the current position by the horizontal and
vertical motion unit. This command sets the position from the current position.
[( nL + nH X 256) X (horizontal or vertical motion unit)].
ESC a n
[Name] Selective adjustment
[Type] ASCII ESC a n
HEX 1B 61 n
DECIMAL 27 97 n
[Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Description] All data for aligning in a line have clear positions.
Adjustment type by the selection of n is as follows.
n Adjustment
0,48 Left adjustment
1,49 Middle adjustment
2,50 Right adjustment
ESC d n
[Name] To print and n line feed
[Type] ASCII ESC D n
HEX 1B 64 n
DECIMAL 27 100 n
[Range] 0 ≤ n ≤ 255
[Description] To print the data in the buffer and feed n lines