3 – A detailed look at your device
Your wireless pushbutton 9314
Button:
the part to press to send a signal
Flexì series snap ts:
these are the snap ts that allow the button to be xed to a Flexì series
support
Key cover hooks:
the button is supplied without key cover and these are the hooks to which
the Flexì series key cover of the color of your choice can be xed.
Button 9314 with key cover installed
4 - Installation
The FEB Easy 9314 button can be installed simply by snap tting it in a FEB Flexì support.
5 – Start up
To pair the pushbutton 9314 with a FEB Easy actuator, simply press the actuator pairing
button for about 3 seconds, until the LED indicator starts ashing, at this point press the
9314 button you want to pair. Just press once. You will see that the LED will stop ashing,
indicating that the two have been paired. It is possible to connect more than one button to
the same actuator, up to a maximum of 10 buttons. There are no limits, instead to the
number of actuators that can be controlled by the same button, simply repeat the pairing
procedure between the button and all the actuators that you want to be controlled by the
same button.
