To reset a connection between the actuator and the buttons, press the actuator pairing
button for about 12 seconds. When the button is pressed, the LED indicator will rst begin to
ash, it will remain lit brie y and then go off. When this sequence is complete and the LED is
off, the pairing button can be released and the actuator and all the buttons it was paired
with will be disconnected.
6 - Technical characteristics
Wireless network: RF 433MHz
IP rating: IP40
Operating distance: Indoor<= 25m / Outdoor <= 60 m
Operating temperature: -5 - 50°C
Dimensions: 22 x 44 x 34 mm