8
Figure 2. Power Base
Electrical Components
The electrical components are located on the power base. The main circuit breaker is located on the
back of the battery box, beneath the handle.
Se
e figure 2.
Battery Box Charger Port:
This enables you to charge the battery when the battery box is removed
from the power base. See “Batteries and Charging.”
NOTE: The battery power switch also serves as the main circuit breaker. See below for more
information.
Battery Power Switch:
This switch turns the battery power on and off. When the switch is in the “l”
position, the battery is on. The battery can be powered
off for long-term storage by switching it to the “0”
position.
Manual Freewheel Levers
For your convenience, your power chair has a manual freewheel lever on each motor. Manual
freewheel levers enable you to disable the drive system in order to maneuver the chair manually.
WARNING! Do not use the power chair while the drive motors are disengaged! Do
Identification Key
1.
Manual Freewheel Lever
2. Battery Box
3. Anti-tip Wheel
4. Storage Compartment
5. Battery Power Switch
6. Battery Charger Port
