14
Controller Position
You can position the controller for either left-hand
or right-hand use. You can also adjust the
controller position angle.
WARNING! Do not place the controller
harness so that it can be pinched in the
seat frame or the power base frame.
To change the controller position:
1.
Turn
off the power to the controller.
2.
Cut the wire ties securing the controller
harness
to the frame.
3.
Unhook the controller harness from the
securement clips. Uninstall the securement
clips and reinstall them on the other side.
See
figure 9.
4.
Flip up the controller armrest. Unlatch thequick
release handle and loosen the thumbscrew.
See figure 9.
5.
Slide the controller out of the armrest.
6.
Reroute the controller harness under the seat
base to the otherside.
7.
Unlatch the quick release handle and loosen
the thumbscrew in the otherarmrest.
8.
Place the controller in the otherarmrest.
9.
Tighten the thumbscrew to secure the
controller
and latch the quick release handle.
10.
Flip up thearmrest.
11.
Use wire ties to secure the controller harness
to the frame, and hook the controller harness
to the securement clips.
See figure 10.
Ensure
that the armrest can freely be raised and
lowered without any tension on the harness
so the securement clips do not become
disconnected.
NOTE: The controller bracket offset will slightly
alter the controller’s positioning when rerouted
to the left armrest.
