2
Important Safety Messages
FE Petro equipment is designed to be used to pump volatile hydrocarbon liquids such as gasoline and diesel fuel.
Installing or working on this equipment means working in an environment in which these highly flammable liquids are
present.
This presents a risk of severe injury or death if these instructions and standard industry practices are
not followed. Read and follow this entire instruction booklet before installing or working on this equipment.
As you read these instructions, watch for the following safety symbols:
Follow all federal, state, and local laws governing the installation of this product and its
associated systems. When no other regulations apply, follow NFPA codes 30, 30A, and 70 from
the National Fire Protection Association. Failure to follow these codes could result in severe
injury, death, serious property damage and/or environmental contamination.
ALWAYS tag and lock breakers so they are not turned on accidentally. If the electrical circuit
breakers are accidentally turned on while the pump is being installed or serviced, electrical
power could be applied to the pump, creating the risk of a potentially lethal electrical shock
hazard and the possibility of an explosion or fire from a spark which could ignite hydrocarbon
vapors present during IST installation.
After disconnecting power to the EcoVFC, wait one minute after LED display blanks before
opening the cover for servicing. Voltage stored in the capacitor bank of the EcoVFC presents a
risk of potentially lethal electrical shock even after power is disconnected.
Install this unit only in a non-hazardous area. This equipment is connected to devices located
in hazardouls locations with highly flammable vapors present. Failure to follow all safety could
result in serious fire or explosion.
Before entering a containment sump check for the presence of hydrocarbon vapors. If
hydrocarbon vapors are at unsafe levels, ventilate the sump with fresh air, re-check the
atmosphere before entering the sump and periodically thereafter. ALWAYS have a second person
standing by for assistance when working in or around a containment sump. Many submersible
pumps are now housed in containment sumps designed to trap hazardous liquid spills and
prevent contamination of the environment. These containment sumps can also trap dangerous
amounts of hydrocarbon vapors which, if inhaled, could lead to dizziness and fainting, or, if
ignited, could result in an explosion causing serious personal injury or death.
Always disconnect both power supplies (the 110-240 VAC from dispenser hook signals and the
360-440 VAC input power supply) before installing or servicing this system. Failure to do so
could result in death or serious bodily injury.
Installer:
This instruction booklet MUST be left with the owner of the service station at which the equipment is being
installed.
Station Owner:
Retain these instructions for future use and provide them to persons servicing or removing this
equipment.
Note:
Always refer to the
Installation and Owner’s Manual
that came with the equipment for the most current and
complete list of installation and safety precautions. Where applicable, this manual may also contain notations on
equipment features present in software version 1.14 and higher.
This symbol identifies a potentially hazardous situation which, if the instructions that follow it are not adhered
to, could result in death or serious bodily injury.
This symbol identifies a potentially hazardous situation which, if the instructions that follow it are not adhered
to, could result in serious property damage, including possible environmental contamination as a result of
the leakage of fuel from the equipment.
Warning
Warning
Warning
Warning
Warning
Warning
Содержание EcoVFC
Страница 26: ...2016FFS 228001102 Rev 10...
