Document Number:
MAN
– FD215CV-C-5
Rev:
B
Revision Date:
01/10/2017
Page 16 of 25
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvioncis.com
User Interface and Front panel:
The 8 button group on the left side of the monitor control the KVM switch.
The 7 button group in the center control the video selection.
The 7 button group on the right side control the Scaler board On Screen Display menu.
The Monitor control system keeps up with the last KVM request to determine if the request for the
“computer” channel will be VGA or DVI.
Operation of the KVM switch group:
There will be no nomenclature around the KVM buttons.
Button operation from left to right will be to select KVM channels 1 through 4 respectively. Top
row of buttons will control the KVM video section. The bottom row will control the KVM USB
section.
Power up States:
Monitor will set internal and external subsystems upon initial application of power.
1)
KVM video and USB will be set to channel 1.
2)
The video channel (DVI or VGA) associated with KVM channel 1 by the rear panel dip switch will be displayed
in the Main screen area.
3)
A Quad view of the four SDI inputs displayed in the PIP area.
4)
The video channel (DVI or VGA) associated with KVM channel 1 by the rear panel dip switch is stored in
Volatile memory as the last requested computer source.
5)
The Quad view of the four SDI inputs is stored in Volatile memory as the last requested video source.
