Document Number:
MAN
– FD215CV-C-5
Rev:
B
Revision Date:
01/10/2017
Page 19 of 25
©
2017 FDS Avionics Corp.
All Rights Reserved.
TECHNICAL SUPPORT
470-239-7421 or FDSAvioncis.com
PIP Button:
Short press of PIP enables and disables the PIP display. If PIP is disabled, then a short press
enables it. If it is enabled, then a short press disables it.
When enabling PIP, if the computer is displayed in the main screen area, then the PIP area
contains the last requested Quad, 1, 2, 3, or 4 video source.
If any video source is displayed in the main screen area, then the PIP area contains the
computer source.
Long press of PIP:
If PIP mode is enabled then a long press of the PIP button swaps the PIP and Main images.
If PIP mode is not enabled, then a long press of the PIP button will swap the last requested
computer source and the last requested video source. If computer is currently displayed, then
a long press of the PIP button will put the last requested video channel (SDI 1, SDI2, SDI3,
SDI4, or Quad view of all four SDI sources) into the full screen view on the monitor. If any of
the video modes are currently displayed, then a long press of the PIP button will put the last
requested computer channel into the full screen view on the monitor.
o
With PIP On: Swaps sources between Main window and PIP window
o
With PIP Off: Swaps sources (computer or video) on the Main window
