A telltale will illuminate in the instrument
cluster display when these lights are on.
Pushing the switch a second time will turn
the lights off.
The bed lights will turn on for approximately
60 seconds when a key fob unlock button is
pushed, as part of the Illuminated Entry
feature.
TAILGATE
THREE-POSITION
TAILGATE
The vehicle’s tailgate can be set to three
positions: open, mid, or closed. The tailgate
is dampened to provide a slower, more
controlled lowering.
To use the mid position, open the tailgate
and lower it to near mid position. Secure the
tailgate in this position by looping the tail
-
gate straps behind the circular retainer on
the box sides.
Tailgate In Mid Position
NOTE:
Three 2x4 boards are needed to provide
support at the two forward locations when
hauling cargo using the mid position and the
tailgate.
TONNEAU COVER
REMOVING THE TONNEAU
COVER
To remove the Tonneau Cover, proceed as
follows:
1. Open the tailgate to access the red
Tonneau Cover release straps, and pull
either one to disengage the locking
mechanism.
2. Roll the Tonneau Cover forward, starting
with the rear bar and continue to roll
toward the front of the truck bed.
3. Using the stowage straps, secure the
Tonneau Cover in the rolled up position.
4. Using a #T50
Torx head driver, remove
the two fasteners securing the Tonneau
Cover to the front of the truck bed.
5. Utilizing two people, lift the Tonneau
Cover up and away from the truck bed.
INSTALLING THE TONNEAU
COVER
To Install the Tonneau Cover, proceed as
follows:
1. Position the rolled up Tonneau Cover on
the truck bed and align it to the two
fastener locations at the front of the bed.
2. Using a #T50
Torx head driver, secure
the fasteners to the bed.
