Fbt HORIZON VHA406ND, Руководство по эксплуатации

Страница: 48 / 56

48
INSTALLATION
INSTALLATION MODE
The assembly of two modules involves a few simple steps:
•
To connect the first module to the fly-bar, extract the locking pin (A)
turning it into the UNLOCK position, insert the fly-bar, make sure
that the pin, once inserted, clicks and fix it in the LOCK position.
• Repeat the same procedure for fixing between two modules;
release the pin (B), choose the desired angle to assign to the
module below using the sliding graduated flange (C). Always
remember, at the end of each operation, to block pins A and B.
(Always make sure at the end of assembly that all the pins are
fully inserted and locked
B
A
A
C
Graduated reference label for the angle between the two modules
from 5 ° to 20 ° in 5 ° steps
Locking Pin