– 30 –
Disarming
Disarming the Security System will deactivate the burglary portions
of the system.
Disarm Procedure
[USER]
Enter your user code.
If No Alarms Have Taken Place
The system will be disarmed and the ARMING indicator will go off.
The system display will reflect the current status.
If Alarms Have Taken Place
If alarms or other conditions such as system troubles have taken place
since the initial system arming, they will appear on the keypad as
follows:
LCD Keypads
If more than one condition has occurred then they will scroll on the
display approximately every two seconds. For example,
BURGLARY
zn 012
MASTER BEDROOM
BURGLARY
zn 005
LIVING ROOM
FIRE
zn 064
Basement Smoke
To silence the keypad enter your USER code. You can also use the
reset command (depression of the 3 and 1 keys together, or the
✴
key)
if your installer has enabled the function.
