LED Keypad Layout (cont’d)
– 10 –
6 – READY INDICATOR
The light marked RDY shows whether the system is ready to be
armed. If the light is off then a condition exists within at least one of
the zones preventing system arming.
7 – ARM/DISARM INDICATOR
This light indicates whether the system is currently ARMED (ON) or
DISARMED (OFF). In addition to this constant visual indication, the
zone indicator lights will provide additional information concerning
the current zone status. This light will also blink if there is an alarm
condition present.
8 – STAY
The STAY key is used to activate (arm) the system with the exception
of interior protection. This will provide exterior protection of your
location while allowing full access through the location. This mode
would be used when arming the system and you might be walking
through protected interior zones.
9 – BYPASS
The BYPASS key will be used to temporarily turn off protection of a
portion of your burglary protection. This could be performed, for
example, to ignore an open window that would prevent the arming of
your system.
10 – INSTANT
The INSTANT key is used to activate (arm) the system and eliminates
the entry delay. This would cause an immediate alarm if someone
came through an exit/entry zone.
11 – CODE
Function key used when entering or changing the User access codes of
your system.
