FB Jets Dolphin S, Инструкция по сборке

Страница: 29 / 39

FB Jets Dolphin S
Step 14: Cockpit
The optional semi scale cockpit tub comes pre-trimmed and painted along with the preinstalled
canopy glass to the frame.

Check fit of canopy frame to fuselage, adjust fitment where required, the canopy latch
should engage with little effort when fitment is correct.

If not preinstalled, the cockpit should be screwed to the canopy frame using small screws
shown with black arrows. The Yellow Arrows in the front point to the two allen head bolts
used to key the canopy to the fuselage slots, the yellow arrows in the rear point to the
locating tabs that key into slots located on the fuselage. The canopy latch is preinstalled
and is located in the rear edge of the canopy.

The Bolt key slots shown in fuselage may require a bit of fitting. The front notch may also
require some fitting to make sure canopy sits flush. After fitting make sure rear latch
engages freely.
29