FAZUA RIDE 50 TRAIL/STREET, Руководство по сборке

Страница: 18 / 32

English | Assembly instructions
18
Step 3: Remove the REMOTE cable from the e-bike frame if necessary
Depending on the manufacturer-specific e-bike frame, you might have to remove the LOCKER
and the BOTTOM BRACKET in order to lead the REMOTE cable through the frame.
→
If necessary, pull the REMOTE cable out of the frame (make sure that all cable fasteners in the frame are
loosened beforehand).
5 LOCKER (LOCK IN FRAME)
The LOCKER designates the lock for the DRIVEPACK on the frame.
5.1 Installing the LOCKER into the frame
→
If necessary, remove the DRIVEPACK from its holder on the e-bike frame before you start
installing the LOCKER.
Step 1: Inserting the cylinder lock (optional)
The equipment with a cylinder lock is optional and depends on the bicycle manufacturer.
The cylinder lock is not included in the scope of delivery of the drive system and cannot be
retrofitted if no space is provided in the frame for the cylinder lock.
→
Skip this step if
no
cylinder lock is to be installed in the LOCKER.
→
Push the cylinder lock (7) as far as possible into
the corresponding holder on the LOCKER so that
the cylinder lock engages in the holder.
Make sure that the cylinder lock is open when you
insert it into the slot on the LOCKER.
7
Step 2: Inserting and fixing LOCKER into the frame
→
Insert the LOCKER into its holder on the e-bike
frame.
→
Tighten the locking screws (RIDE 50 Screw Lock
Mount)
(8) with the Torx screwdriver T20.
1.8–2.2 Nm
8