Product description
English - 11
Audio and microphone connection
The audio and microphone connection (
10
,
11
) has a diameter of 3.5 mm and is used for transmitting
audio signals.
COM2, RS-232
The serial interface DSUB9 port for COM2 (
12
) is automatically set to RS-232, and is unchangeable in
the BIOS. RX/TX option. See the complete pin definition in the illustration on the previous page.*
DIO / GPIO (General-Purpose Input/Output)
The DIO (
13
) is an RJ50 connector and has a total of 10 pins. See the complete pin definition in the
illustration above.
COM3 & COM4, RS-232/485
The COM3 and COM4 (
14
,
15
) use RJ25 (6P6C) ports and support RS-485 and RS-232 via different
pins. See the complete pin definition in the illustration above.*
On / Off switch
With the button (
16
) the touch PC can be switched on and off.
Audio Speakers
This Integrated audio speaker (1
7
) is a 2W audio speaker, and the touch monitor has one on each side
(left side and right side).
SSD Module Slot
The SSD slot (
18
) has a 2.5" exchangeable SSD, with standard 128GB industrial SSD.
Left side of the
Capacitive Touch PC
8 9 10
7
6
5
4
3
2
1
1. DIO_GP42
3. DIO_GP40
5. DIO_GP36
7. DIO_GP34
9. +5V
2. DIO_GP41
4. DIO_GP37
6. DIO_GP35
8. DIO_GP33
10. GND
Pin definition for COM3 / COM4
1. RS-485 A+
2. RS-232 TX
3. GND
4. NC
5. RS-232 RX
6. RS-485 B-
1 2 3 4 5 6
*Note: on Linux, COM1 -COM4 are available as /dev/ttyS0 -/dev/ttyS3.
