Fayat Dynapac F80W, Сервисная книжка

Страница: 21 / 78

17 F80W
Service book
3.2.2 Fuel
Diesel oil is used as fuel for the engine:
• EN 590
• BS 2869 A1 / A2
• ASTM D 975-09a 1-D S15 / 2-D S15
At ambient temperatures below 0°C (32°F), use winter diesel
fuel.
Mixing diesel with special additives is forbidden.
Mixing diesel with petrol is forbidden.
3.2.3 Hydraulic oil
2158
For the hydraulic system of the machine, it is necessary to use
only high-quality hydraulic oil grades according to ISO 6743/HV
(equal to DIN 51524 part 3 HVLP).
Fill the Machines normally with hydraulic oil that has cinematic
viscosity of 46 mm
2
/s at 40°C (104°F) ISO VG 46. This oil is the
most suitable for use in the widest range of ambient tempera-
tures.
Synthetic hydraulic oil
The hydraulic system can be filled with synthetic oil, which if
leakages occur will be degraded completely by micro-organ-
isms present in water and soil.
Always consult with the oil manufacturer or dealer any
switching from mineral oil to synthetic or mixing oils of
various brands!
3.2.4 Anti-adherent solution
AMN411
The anti-adhesive liquid is a non-adhesive additive.
It serves for cleaning the hopper, conveyor, augers and parts of
the machine which are in contact with the paved asphalt mate-
rial.
Use an environmentally-friendly anti-adherent solution accord-
ing to the applicable national regulations.
To create the anti-adherent solution, mix a non-sticking agent
with water according to the instructions of the non-sticking
agent manufacturer.
Dosage
The anti-adherent solution dosage may vary depending on the
operating conditions:
For standard mixtures, 1 part of anti-adherent solution in 30
parts of water. (1:30)
For modified mixtures, 1 part of anti adherent solution in 5 parts
of water. (1:5)
Note
There is no vessel for an anti-adherent solution on the machine.
To apply the anti-adherent solution on individual parts of the
machine, use a hand pump for spraying liquids.
It is prohibited to use diesel oil instead of an anti-adher-
ent solution.