Fayat DYNAPAC DRP20D, Инструкция по эксплуатации, Страница: 78 / 102

9. Check the centre distance (x) between the centrifugal clutch
(1) and the V-belt pulley (2).
ð
Nominal value: 325
±
1 mm (12.8
±
0.04 in)
If the centre distance is incorrect, contact
our customer service.
10. Fasten the guard plate, tightening torque: 15 Nm (11 ft
·
lbf).
11. Fasten the V-belt guard (1).
8.8.5.1 Checking the frequency of the base plate
Keep feet and hands clear of the vibrating base plate.
CAUTION!
Danger of injury caused by uncontrolled
machine movement!
– Always hold on to a running machine.
– Always keep an eye on a running machine.
Protective equipment: n Working clothes
n Hearing protection
n Safety shoes
Tool: n Sirometer
1. Park the machine on a rubber mat.
2. Start the engine
Ä
Chapter 6.2 ‘Starting the engine’
on page 49 .
3. Run the machine at maximum speed for one minute.
4. Check the base plate’s frequency with a suitable measuring
instrument (e.g. Sirometer).
ð
Nominal value: Ä Chapter 2 ‘Technical data’ on page 11
5. Park the machine safely
Ä
Chapter 6.4 ‘Parking the machine
in secured condition’ on page 53 .
B-692-0183
x
1
2
Fig. 69
1
B-692-0151
Fig. 70
Maintenance – Annually
DRP20D 78