manualshive.com logo in svg

Fayat DYNAPAC DRP20D, Инструкция по эксплуатации, Страница: 68 / 102

Поделиться
Скачать
Fayat DYNAPAC DRP20D Скачать руководство пользователя страница 68

8.5  Running-in instructions

8.5.1  General

The following maintenance work must be performed when running

in new machines or overhauled engines.

8.5.2  After 25 operating hours

1.

Change the engine oil

 

Ä

 Chapter 8.8.1 ‘Changing the engine

oil and cleaning the oil filter’ on page 73

.

2.

Check the valve clearance, adjust if necessary

 

Ä

 Chapter

8.8.6 ‘Checking, adjusting the valve clearance’ on page 79

.

3.

Check engine and machine for leaks.

4.

Retighten the fastening screws on air filter, exhaust and other

attachment parts.

5.

Retighten the bolted connections on the machine.

6.

Check the V-belt

 

Ä

 Chapter 8.10.3 ‘Servicing the V-belt’

on page 90

.

7.

Check the oil level in the exciter shaft housing

 

Ä

 Chapter

8.10.4 ‘Checking the oil level in the exciter housing’

on page 91

.

Maintenance – Running-in instructions

 

DRP20D

 

68

Содержание DYNAPAC DRP20D







































































































Отзывы:

Нет отзывов