manualshive.com logo in svg

Fayat DYNAPAC DRP20D, Инструкция по эксплуатации, Страница: 19 / 102

Поделиться
Скачать
Fayat DYNAPAC DRP20D Скачать руководство пользователя страница 19

Examples for improper use are:

n

dragging the machine along as a measure of transportation

n

throwing the machine off the transport vehicle

n

attaching an additional weight to the machine

It is not permitted to stand on the machine while working.

Lifting tackle must be removed before starting work.

Starting and operating the machine in explosive environments and

in underground mining is prohibited.

The lifting and lashing points specified in these instructions must

be used. It is prohibited to use other lifting and lashing points (e.g.

guide handle, steering rod).

3.1.6  Estimated service life of the machine

If the following general conditions are met, the service life of the

machine is usually in the range of several thousand operating

hours:

n

Regular safety inspections by an expert / qualified person

n

Performance of the prescribed maintenance work within the

specified time

n

Immediate performance of necessary repair work

n

Exclusive use of original spare parts

Concerning your safety – Basic prerequisites

 

DRP20D

 

19

Содержание DYNAPAC DRP20D







































































































Отзывы:

Нет отзывов