manualshive.com logo in svg

Fayat Dynapac DR7X, Руководство по эксплуатации

"Fayat Dynapac DR7X" - профессиональный оборудованный дробильно-распределительный комплекс высокой производительности. Для корректной эксплуатации не забудьте загрузить бесплатное руководство по эксплуатации на manualshive.com. В этом руководстве вы найдете все инструкции по использованию оборудования. Улучшите процесс работы с помощью Operating Instruction.

Поделиться
Скачать
background image

7.2  Lashing the machine to the transport vehicle

Do not use lashing points that are damaged or impaired in any

way.

Always use appropriate lashing tackle at the lashing points.

Use lashing tackle only in the specified loading direction.

Lashing tackle must not be damaged by machine parts.

Protective equipment:

n

Working clothes

n

Protective gloves

n

Safety shoes

WARNING!
Danger of burning on hot components!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

–

Avoid touching hot components.

1.

Lean the tamper foot against the side wall of the transport

vehicle.

2.

Fasten the machine on the transport vehicle with at least two

suitable lashing belts.

B-541-0019

Fig.  42

Loading/transporting the machine – Lashing the machine to the transport vehicle

 

DR7X

 

60

Содержание Dynapac DR7X















































































































Отзывы:

Нет отзывов

Похожие инструкции для Dynapac DR7X

Бренды по названию

Популярные бренды

Загрузить еще бренды