Fayat Dynapac DR7X Скачать руководство пользователя

Страница: 60 / 110

7.2 Lashing the machine to the transport vehicle

Do not use lashing points that are damaged or impaired in any

way.

Always use appropriate lashing tackle at the lashing points.

Use lashing tackle only in the specified loading direction.

Lashing tackle must not be damaged by machine parts.

Protective equipment:

Working clothes

Protective gloves

Safety shoes

WARNING!
Danger of burning on hot components!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

–

Avoid touching hot components.

Lean the tamper foot against the side wall of the transport

vehicle.

Fasten the machine on the transport vehicle with at least two

suitable lashing belts.

B-541-0019

Fig. 42

Loading/transporting the machine – Lashing the machine to the transport vehicle

DR7X

Содержание Dynapac DR7X















































































































Результаты поиска

Содержание Dynapac DR7X

Отзывы:

Похожие инструкции для Dynapac DR7X

Бренды по названию

Популярные бренды

Fayat Dynapac DR7X, Инструкция по эксплуатации

Результаты поиска

Содержание Dynapac DR7X

Отзывы:

Похожие инструкции для Dynapac DR7X

Бренды по названию

Популярные бренды