Fayat BOMAG BPR 50/55 D Скачать руководство пользователя страница 25

Страница: 25 / 112

3.4.2 Safety regulations and environmental protection regulations for handling

diesel fuel

WARNING!
Danger of burning by ignited diesel fuel!

–

Do not allow diesel fuel to come into contact

with hot components.

–

Smoking and open fire is prohibited!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

CAUTION!
Health hazard caused by contact with diesel

fuel!

–

Wear your personal protective equipment (pro-

tective gloves, protective clothing).

–

Do not inhale any fuel fumes.

–

Avoid contact.

CAUTION!
Danger of slipping on spilled diesel fuel!

–

Immediately bind spilled diesel fuel with an oil-

binding agent.

ENVIRONMENT!
Diesel fuel is an environmentally hazardous

substance!

–

Always keep diesel fuel in proper containers.

–

Immediately bind spilled diesel fuel with an oil-

binding agent and dispose of properly.

–

Dispose of diesel fuel and fuel filters according

to regulations.

Fig. 4

Concerning your safety – Handling fuels and lubricants

BPR 50/55 D

Discount-Equipment.com

order

your

parts

Содержание BOMAG BPR 50/55 D

















































































































Результаты поиска

Содержание BOMAG BPR 50/55 D

Отзывы:

Похожие инструкции для BOMAG BPR 50/55 D

Бренды по названию

Популярные бренды

Fayat BOMAG BPR 50/55 D, Инструкция по эксплуатации

Результаты поиска

Содержание BOMAG BPR 50/55 D

Отзывы:

Похожие инструкции для BOMAG BPR 50/55 D

Бренды по названию

Популярные бренды