Fayat Group DYNAPAX DRP45DX, Инструкция по эксплуатации, Инструкция по обслуживанию

Страница: 89 / 118

3. Clean the area around the bleeding screw (1) and filling/drain
plug (2).
4. Tilt the machine slightly towards the oil drain side and secure
it properly.
5. Unscrew the bleeding screw.
6. Unscrew the filling/drain plug and collect any oil running out.
7. Tilt the machine to the opposite side and secure it properly.
NOTICE!
Components may get damaged!
Do not use low-ash engine oils for the exciter shaft
housing.
Observe filling quantity
Ä
Chapter 8.4 ‘List of fuels
and lubricants’ on page 72 .
8. Fill in new oil.
9. Stand the machine horizontally and check the oil level.
ð
Nominal value: Bottom edge of filling/drain bore.
10. Clean the bleed screw and filling/drain plug and screw them
in with a low-strength sealing agent (e.g. spare parts number:
DL 009 700 16).
11. Dispose of oil in line with environmental regulations.
1
2
B-695-0179
Fig. 96
B-695-0181
Fig. 97
B-695-0180
Fig. 98
Maintenance – Annually / every 250 operating hours
DRP45DX 89