Fayat Group DYNAPAX DRP45DX, Инструкция по эксплуатации, Инструкция по обслуживанию

Страница: 109 / 118

9.5 Malfunctions during operation
Fault Possible cause Remedy
The machines
vibrates forward
with a strongly
reduced speed
Air in the steering rod hydraulic system Release pressure from the steering rod
The oil level in the exciter shaft housing
is too high
Check the oil level in the exciter shaft
housing
Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
1. Park the machine safely
Ä
Chapter 6.4 ‘Parking the machine
in secured condition’ on page 59 .
2. Press the handle forward against the end stop and hold it in
this position.
3. Carefully loosen the filler screw (1).
ð
The air makes a slight hissing sound when escaping.
4. Wait until all air has escaped and then tighten the filler screw,
tightening torque: 45 Nm (33.2 ft
·
lbf).
Release pressure from the steering
rod
B-692-0092
1
Fig. 134
Troubleshooting – Malfunctions during operation
DRP45DX 109