Fayat Group DYNAPAC CA2800 Скачать руководство пользователя страница 14

Страница: 14 / 170

Introduction

4812159001_I.pdf

2019-11-05

Read the entire manual before starting the
machine and before carrying out any
maintenance.

Ensure good ventilation (extraction of air by fan)
where the engine is run indoors.

CALIFORNIA

Decal and location of decal shown in section
Machine description.

Proposition 65

General

This manual contains instructions for machine
operation and maintenance.

The machine must be correctly maintained for
maximal performance.

The machine should be kept clean so that any
leakages, loose bolts and loose connections are
discovered at as early a point in time as possible.

Inspect the machine every day, before starting.
Inspect the entire machine so that any leakages or
other faults are detected.

Check the ground under the machine. Leakages are
more easily detected on the ground than on the
machine itself.

Содержание DYNAPAC CA2800











































































































































































Результаты поиска

Содержание DYNAPAC CA2800

Отзывы:

Fayat Group DYNAPAC CA2800, Инструкция по эксплуатации, Страница: 14 / 170

Результаты поиска

Содержание DYNAPAC CA2800

Отзывы: