Maintenance every day
BOMAG
35
BP 12/40, BP 20/50, BP 25/50
Maintenance every day
5.6
Clean the machine
!
Caution
Dirty operating conditions, particularly lubri-
cation oil and fuel deposits on the cooling fins
of the engine and the cooling air intake open-
ing have an adverse effect on the cooling of
the engine.
You should therefore immediately seal any oil
or fuel leaks near fuel tank, cylinder or cooling
air intake.
Fig. 27
!
Caution
Do not guide the water jet directly into air filter/
carburettor (1) (Fig. 27), starter/air intake (2)
and motor switch (3).
l
After wet cleaning run the engine warm to
evaporate all water residues and to avoid cor-
rosion.
5.7
Check the engine oil level
i
Note
Park the machine on level ground so that the en-
gine is in horizontal position.
Fig. 28
l
Unscrew the oil filler plug (Fig. 28).
l
The oil level must reach the edge of the oil filler
socket, if necessary fill up oil.
For quality and quantity of oil refer to the "table
of fuels and lubricants".
l
Check the seal on the oil filler plug, replace if
damaged.
l
Screw in the oil filler plug.
Go
to
Discount-Equipment.com
to
order
your
parts
