Fayat Group BOMAG BF 800 C, Руководство по обслуживанию

Страница: 20 / 41

1.3
General repair instructions
BOMAG 20 008 917 73
l
Do not use any previously used cleaning or testing
fluids for cleaning.
l
Compressed air should never be used for cleaning
when the fuel system is open.
l
Work on disassembled components must only be
carried out at a specially furnished work place.
l
When removing or assembling components you
should not use any materials from which particles or
fibres could flake off (cardboard, wood, towels).
l
Dismantled parts must only be wiped off with clean,
lint-free cloths if required. No dirt particles must be
wiped into the components.
l
Close openings on components and engine imme-
diately with suitable plugs/caps.
l
Plugs/caps must only be removed just before the in-
stallation.
l
Keep plugs/caps in their original packaging, where
they are protected against dust and dirt, dispose of
after one time use.
l
Take new parts out of their original packaging just
before installation.
l
Removed components must be stored in new, seal-
able bags or – if available – in the packaging mate-
rial of the new components.
l
Always use the original packaging material of the
new part to return the disassembled old component.
Notes and measures concerning the workshop
area
l
For work, such as disassembly and assembly of de-
fective hydraulic components in the Common Rail
System, it is strongly recommended to set up a sep-
arate workshop area, i.e. an area which is spatially
separated from all other areas (general vehicle re-
pairs, brake repairs).
l
The workshop floor must be sealed or tiled.
l
No welding equipment, grinding machines, general
machine tools, brake or power test benches must
be operated in this room.
l
Periodic cleaning of this workshop area is obligato-
ry, draughts, ventilation system and heating blow-
ers must be minimized.
Notes and measures for work place and tools in
the workshop
l
A special work place must be set up for work on dis-
assembled components.
l
Clean disassembly and assembly tools at regular
intervals and keep these in a closed tool cabinet.
l
Remove loose parts (e.g. paint scales that may
have come off during assembly work) with an indus-
trial vacuum cleaner or any means of extraction.
l
Working means and tools must be cleaned before
being used for work. Use only tools without dam-
aged chromium coating, or tools without chromium
coating.