FAVORIT CC500SF, Руководство пользователя

Страница: 61 / 63

Cleaning of Your Oven’s Cover
In order to be able to clean the cover of your oven from inside and outside, use a glass
cleaner. Then rinse, dry it with a dry cloth. The cover can be pulled out for cleaning as shown
in the following figure.
*
Open the cover completely.
*
Pass the metal pin through the holes as shown on picture
*
Do this process for both hinges.
*
Lift up the cover slightly, pull towards the outside smoothly. The cover will completely
come out.
*
Again place it into hinge holes while pinning the cover to its place.
Do not clean the oven’s cover while the glass panels are hot. In case this measurement
is not taken, the glass panel may brake down. Contact to Authorized Service when
any problem occured.
Cleaning Vitroceramic Cooker
Before starting cleaning wait for Vitroceramic cooker completely cool down. Be sure that
cleaning material does not contain any particles which may cause to scratch glass.Use cream
or liquid detergent. Vitroceramic surface must be cleaned with cold water and dried with soft
cloth in a way that no cleaning material may be left. Use pallet provided with your product
for cleaning food or residues. Sweet type food must be cleaned right after they are spilled
before glass cools down. Steel cleaning material may damage Vitroceramic glass. Dust on
the surface must be cleaned with wet cloth. Color change on ceramic surfaces does not effect
functional structure and durability of Vitroceramic.
Color change is caused by not cleaning the residues, erosion due to casseroles and using
not appropriate cleaning materials and is not due to material change. Cleaning pallet must
always be used before applying chemicals. With this pallet you can clean even the smallest
dirt on the surface. Materials that are hard to clean like liquified plastic, oil and sweety materials
can be cleaned with pallet easily. Your pallet is dangerous because it is equipped with razor
therefore it must be kept away from chidren. Be careful not to scratch silicon adhesive placed
on the edges of the glass while using pallet.
5.2 MAINTENENCE
Change of Oven Lamp
The change of oven lamp must be done by authorized technician. The rating the ampoule
should be 230V, 25Watt, Type E14 before changing the lamp,the oven should be plugged
off and it should be cool.