FAURE HERMAN FH8500, Руководство пользователя

Страница: 39 / 115

Chapter 3: Using the FH8500 remote control device
37
37 37
37
General parameter setting procedure
From the local display, enter the parameter setting mode by
pressing the Enter key of the remote control device.
Use the
↑
and
↓
keys for selecting a sub-menu or a parameter.
The selected option is indicated by an
→
arrow on the left of the
item. The parameters stored in the FH8500 are indicated by a *
character.
For the numerical values, select the value of each digit separately.
(The sign is modified by means of the
↓
and
↑
keys).
Press the Enter key to validate the selected parameter or value.
Remark: Each parameter setting screen includes an "Exit" line and a
"Stop" / "Start" line. (The "Stop" / "Start" line is displayed only when
the FH8500 is in non custody transfer mode.)
The "Exit" line allows to return into the measure mode display.
The "Stop" / "Start" line allows to stop and restart the meter. (The
stopping and restarting of the meter are recorded in the Event logger.)
Principle of menus and sub-menus numbering
Each menu or sub-menu is numbered by means of a 1, 2, 3 or 4
figure number.
Example: The 113 menu corresponds to the following arbo-
rescence:
1. Settings
11 4/20 + Alarm units
113 Volume