Faun C40 Trackway, Руководство пользователя

Страница: 21 / 42

Fig. 5-16 C90 Male and Female Panel ends
C40 / C90 Trackway ® Boat Ramp must only be deployed in a straight line.
21
5670480 (FTW-5670480 - 4.0) Boat Ramp Kit Copyright © FAUN Trackway Limited
5. OPERA
TION
5.10.2 Positioning the C40 / C90 Trackway ® Boat Ramp
Position the new C40 / C90 Trackway
®
Boat Ramp with the ‘open end’ facing the end of the
existing run (ensure male female joint).
Remove the end panel (or Half Panels) from the end of the first C40 / C90 Trackway
®
Boat
Ramp.
The end of the second C40 / C90 Trackway
®
Boat Ramp should be lined up with the end of
the panel to be joined at a distance of approximately 300mm. Slowly move the roll whilst
continuously checking the alignment until this is the case. Synthetic Ropes may be required
for C40 / C90 Trackway
®
Boat Ramp adjustment.
Fig. 5-17 Aligned Ready for Joining