FATEK CBEH, Руководство пользователя

Страница: 17 / 71

17
①
Select LAN for Attached Media
②
After clicking the Scan button it will start to scan the network modules online,
all the detected modules will be display in the table in the middle of the window.
When scanning is complete, move the mouse cursor over the module data row
you want to set and left-click the mouse and select the Properties.. button, or
just double click the mouse’s left button to enter the module configuration
window.
If you already know the CBEH expansion board’s network address and the address
matches the domain it is in, you can use the following method to connect the CBEH
expansion board:
①
Select Internet for Attached Media.
②
Enter the CBEH expansion board’s network address and communication port
(default value is 111).
③
After clicking the Load.. button, it will start to connect to the network module
with that network address; after receiving a response message, the data of that
module will be displayed in the table in the middle of the window. At this time,
move the mouse cursor over that module data row and left-click the mouse and
select the Properties.. button, or just double click the mouse’s left button to
enter the module configuration window.
1
2
1
2
3