5 - EN
EN
Fatboy® product information Oloha:
The Fatboy® Oloha is an atmospheric light with a
built-in rechargeable battery. The light source con-
tains 12 LED modules emitting 2200K (warm white)
light and the brightness can easily be adjusted.
Oloha can be used both indoors and outdoors and
is resistant to moisture from water sprayers or light
rain. The lamp comes equipped with a USB-A to
Magnetic pogopin connection.
Please make sure to use a 5V 1A adapter to charge
Oloha. A fully-charged lamp remains lit for more
than 10 hours (at 100% brightness) and up to 99
hours at the lowest brightness setting.
WARNING: READ ALL INSTRUC-
TIONS BEFORE USE! SAVE
THESE INSTRUCTIONS!
• Make sure to use a 5V 1A USB adapter (using a
different power adapter may cause irreparable
damage to the luminaire).
• Use only the supplied USB cable to charge
the lamp.
• This is not a toy, please keep away from children.
• Non-replaceable light source: The light source of
this luminaire is not replaceable; when the light
source reaches its end of life the whole luminaire
shall be replaced.
Battery:
If the battery will not hold a charge anymore, please
contact your Fatboy® dealer. The disposal of elec-
tronic devices containing battery’s should be in com-
pliance with any local regulations that address the
disposal of hazardous materials. Do not incinerate!
Instructions for use:
• When using outdoors basic safety precautions
should always be followed to reduce the risk of
fire, electric shock, and personal injury, including
the following.
• Make sure to position the Oloha in a
suitable location:
1. On a rigid, horizontal surface. When using
Oloha outdoors, we recommend that you avoid
exposing it directly to any rain or water from
other sources, such as sprinklers, to keep water
from entering the shade.
2. On a vertical surface using the correct fas-
teners/plugs to create a proper connection to
the base. The mounting screw (not included)
should be able to support a minimum of 5kg
to comply with basic safety regulations. Only
use screws with a minimum head diameter of
6.5mm. Make sure to use the correct fasteners
and plugs, suitable for the surface on which
you are mounting the Oloha. If needed, ask a
professional for advice.
