3 - EN
tear try to store the Bellboy indoors
during seasons of heavy rain or
low temperatures. Some of the
components can be replaced if they
are damaged. Visit our website or
use the following QR core to find
the instructions (we recommend
following the instructions in order
to guarantee good results):
Cleaning the lamp:
Use a soft cloth, preferably dry or, if
needed, moistened with lukewarm
water and mild liquid soap. Please
be gentle to avoid any scratching.
Do not use cleaning agents contain-
ing alcohol, ammonia, benzene, or
abrasive substances. Never open
the lamp when cleaning.
Trouble shooting:
The lamp has fallen and the shade
fell off.
• The shade can easily be replaced
by putting it back into position
and twisting the shade clockwise
to lock it. Check to make sure
both batteries are still in position
before replacing the shade.
The lamp is not working:
• Check the connection with the
adapter and make sure the lamp
is charging.
Connect the USB/Magnetic
charging cable to the USB adapter.
Plug the recommended 5V 2A
adapter into the wall socket.
• For first time use, we advise you
to charge the built-in battery for
at least 8 hours.
• For normal charging, it will take
approx. 3 hours to fully charge
the lamp.
• The lamp can be operated by
tapping the button on top
of the shade.
1. The lamp is turned off.
2. Press one time: the light will
turn on.
3. Press and hold to set the light
intensity. The brightness will
increase and decrease in a loop
and will remain at the chosen
intensity once the switch
is released.
4. Press third time: the light will
turn off.
5. Press again: the lamp will turn
on again to the last
intensity setting.
• The lamp can be operated
while charging.
• When the lamp stops emitting
light, the Bellboy needs to be
recharged. Always charge the
lamp indoors.
Maintenance:
When not in use for an extended
period of time, make sure the
lamp is turned off. We recommend
recharging the lamp every three
months to keep the batteries in
good condition. To avoid wear and
