Fatshark 7 RC Vision Systems
Setup
The head tracker can be configured to output the pan/tilt signals on channels
5 – 8 of the student PPM stream. To enter the setup menu, hold down the
head tracker button before applying power to the headset (release button
immediately after powering).
The head tracker will beep and enter menu mode and beep according to the
following chart. Press the HT button a 2
nd
time during the pause after the
menu choice beep code to select. Head tracker will automatically exit menu
after a selection has been made and begin operating.
Beep code
Mode
1 short beep
Pan/tilt on CH 5/6 (factory default)
2 short beep
Pan/tilt on CH 5/7
3 short beep
Pan/tilt on CH 5/8
4 short beep
Pan/tilt on CH 6/7
5 short beep
Pan/tilt on CH 6/8
6 short beep
Pan/tilt on CH 7/8
1 long beep
Reverses pan/tilt servo direction
Loops back to top if no selection made
Accessories
Head tracker
The Fat Shark Dominator head tracker is an advanced 3 axis head tracker
that uses gyro sensor for smooth motion detection and accelerometer and
compass sensor for error correction.
Insertion
