Fat Shark
6
RC Vision Systems
Head Tracking Menu Navigation
To enter head tracking menu, hold head tracker button while inserting battery and
immediately release the button after barrel insertion.
Beep Code
Mode
1 short beep:
P/T on ch 5/6
2 short beep:
P/T on ch 6/7
3 short beep:
P/T on ch 7/8
4 short beep:
Reverse pan direction
5 short beep:
Reverse tilt direction
1 long beep:
Adjust servo center point*
1 short beep:
Restore factory defaults
2 long beep:
No selection made, automatically exits menu
* Press HT button to gain manual control of the camera with the headset. Adjust camera to
desired center position by moving headset and press button to set new camera center. Note
that if your servos are not near the center point before adjusting, the servo travel may be
limited.
For a complete and up to date list of compatible RC radios and their setup, a head tracking
sticky thread is maintained at www.FPVlab.com under SPONSORS GATE/FAT SHARK
Operation Notes:
Head tracker analog tracking is always on. Depressing button re centers head tracker.
