Fat Shark
5
RC Vision Systems
Controls
Brightness/contrast/2D or 3D display control:
Pressing left/right increases/decreases
display contrast. Pressing forward/back increases/decreases display brightness.
Display mode selection
: Goggles will boot up in 2D analog. Vertically depressing the
contrast/brightness button scrolls through the following modes:
Default: 2D
Single press: 3D
Second press: 3D with left and right image swapped
Third press: returns to 2D
RX power switch:
The receiver module power is controlled by this switch. Turn off RX
module to avoid video conflict with video source via the AV cable.
Channel select:
Rocking the channel select switch forward and back will cause the channel
to incrementally increase/decrease. Audio beep sounds on channel change. A long beep
sounds on channel top and bottom limits.
Note: Fat Shark only guarantees compatibility with Fat Shark or ImmersionRC transmitters.
Name
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
Fat Shark/IRC
5740
5760
5780
5800
5820
5840
5860
5880
Band E
5705
5685
5665
5645
5885
5905
5925
5945
Band A
5865
5845
5825
5805
5785
5765
5745
5725
RaceBand
5658
5695
5732
5769
5806
5843
5880
5917
Head tracker menu/reset:
Activated by a vertical press on the channel rocker switch.
Low battery warning:
Audio warning if input voltage drops below 6.8V
Volume control:
There is no volume control - volume level is set at high. Please use with
adjustable earphone accessory for volume control.
