
KIC551
K I C 5 5 1 U s e r M a n u a l
51
© 2 0 2 1 F a s t w e l V e r . 0 0 3
4 Program configuration of KIC551/KIC551RC
The software used with the KIC551 / KIC551RC module includes operating and configuration
software. The operating software includes the bootloader and control program in the
microcontroller, as well as the control program for the FPGA.
4.1 Modification of operating software
The module is supplied with the preinstalled operating software. Nevertheless, the user can modify
and upgrade the operating software by itself, if necessary.
Attention!
All software modifications should be performed strictly in accordance with this User Manual.
The user can modify the following components of the operating software: the control program of
the microcontroller and FPGA control program.
To program the micrcocontroller control program you should connect the Gigabit Ethernet interface
of an external PC via RJ45 cable with the
1 Gb Eth connector
, located on the front panel of
KIC551/KIC551RC (Fig. 2.7).
After feeding the power to KIC551/KIC551RC you should start the Telnet-client program on the
external PC,
e.g. “PuTTY” utility or similar.
Paramters of setting the Telnet-client connection
using the example of the “PuTTY” utility are
specified on the below screenshot: