External Connections
CPB904
3.2
Connection of Peripheral Devices
External devices, except for MiniSD cards, are connected to CPB904 via KIB1282 ATX carrier
board for ETX/XTX computer modules.
Figure 3.1:
KIB1282 Baseboard Appearance
The appearance may vary for different versions of the module.
KIB1282 baseboard provides access to the following interfaces and connectors:
VGA (D-Sub connector), S-Video, LVDS, FastEthernet 10/100-BaseT (one RJ45 connector),
two x1 PCI Express connectors, one 16-bit ISA and two PCI headers, USB 2.0 (four Type A
connectors), IDE UltraATA, four standard SATA connectors, CF Type I/II socket with IDE interface,
two RS232 COM ports, LPT and FDD standard connectors, two PS/2 connectors, two
ExpressCard™ slots, Audio line in/out, HD (5+1 out) Audio Codec, two MIC, IrDA, LPC interface,
SMBUS, PLCC, fan connector, control&signalling interfaces and LEDs, ATX power supply header.
3.3 Software
Installation
Operating system is loaded from the on-board NAND Flash memory by default. Operating system
on this flash-disk is FDOS supplemented with utilities.
The installation of the peripheral drivers is described in the accompanying information files. For
details on installation of an operating system, please refer to the relevant software documentation.
C P B 9 0 4 U s e r M a n u a l
3-2
© 2 0 0 8 F a s t w e l v . 0 0 1 E