Edition 1.1 pg.13
1.
Internal control: you operate the two standard relays that are available in the Wizard. Enter
the codes above for each user under Telephone Guide. The badge reader will always activate
contact 2.
2.
Wiegand output: both then output 26-bit Wiegand to an external controller. For this, you
must connect pins 1, 2, and 3 to the green connector and connect to this external controller.
Under download configuration, you can make a backup of the Wizard.
Under upload, you can select and upload a backup.
Add language
: foreign languages can be added here. Contact Fasttel for this.
Log file
: this is primarily intended for any error diagnosis by the manufacturer.
Factory reset
: device is restored to factory settings
Or you can restart the device.
